|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RHRG30100 Data Sheet January 2000 File Number 3941.2 30A, 1000V Hyperfast Diode The RHRG30100 is a hyperfast diode with soft recovery characteristics (trr < 65ns). It has half the recovery time of ultrafast diodes and is of silicon nitride passivated ion-implanted epitaxial planar construction. This device is intended for use as a freewheeling/clamping diode and rectifier in a variety of switching power supplies and other power switching applications. Its low stored charge and hyperfast soft recovery minimize ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistors. Formerly developmental type TA49064. Features * Hyperfast with Soft Recovery . . . . . . . . . . . . . . . . . . <65ns * Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC * Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000V * Avalanche Energy Rated * Planar Construction Applications * Switching Power Supplies * Power Switching Circuits * General Purpose Ordering Information PART NUMBER RHRG30100 PACKAGE TO-247 BRAND RHRG30100 Packaging JEDEC STYLE TO-247 NOTE: When ordering, use the entire part number. ANODE Symbol K CATHODE (BOTTOM SIDE METAL) CATHODE A Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified RHRG30100 UNITS 1000 1000 1000 30 70 325 125 20 -65 to 175 V V V A A A W mJ oC Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV) (TC = 95oC) Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFRM (Square Wave, 20kHz) Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM (Halfwave, 1 Phase, 60Hz) Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Avalanche Energy (See Figures 10 and 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAVL Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ 1 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 2000 RHRG30100 Electrical Specifications SYMBOL VF IF = 30A IF = 30A, TC = 150oC IR VR = 1000V VR = 1000V, TC = 150oC trr IF = 1A, dIF/dt = 100A/s IF = 30A, dIF/dt = 100A/s ta tb QRR CJ RJC DEFINITIONS VF = Instantaneous forward voltage (pw = 300s, D = 2%). IR = Instantaneous reverse current. trr = Reverse recovery time (Figure 9), summation of ta + tb. ta = Time to reach peak reverse current (See Figure 9). tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 9). QRR = Reverse recovery charge. CJ = Junction Capacitance. RJC = Thermal resistance junction to case. pw = Pulse width. D = Duty cycle. IF = 30A, dIF/dt = 100A/s IF = 30A, dIF/dt = 100A/s IF = 30A, dIF/dt = 100A/s VR = 10V, IF = 0A TC = 25oC, Unless Otherwise Specified TEST CONDITION MIN TYP 35 33 200 100 MAX 3.0 2.5 250 1.0 65 75 1.2 UNITS V V A mA ns ns ns ns nC pF oC/W Typical Performance Curves 300 1200 IR , REVERSE CURRENT (A) 175oC 100 100oC 10 IF, FORWARD CURRENT (A) 100 100oC 175oC 25oC 10 1 25oC 0.1 0.03 1 0 1 2 3 4 5 6 VF, FORWARD VOLTAGE (V) 0 200 400 600 800 1000 VR , REVERSE VOLTAGE (V) FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE 2 RHRG30100 Typical Performance Curves 80 TC = 25oC, dIF/dt = 100A/s 70 t, RECOVERY TIMES (ns) 60 50 40 30 20 tb 10 0 1 10 IF , FORWARD CURRENT (A) 30 ta trr t, RECOVERY TIMES (ns) (Continued) 200 TC = 100oC, dIF/dt = 100A/s 175 150 125 100 75 tb 50 ta 25 0 1 10 IF , FORWARD CURRENT (A) 30 trr FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 4. trr, ta AND tb CURVES vs FORWARD CURRENT IF(AV) , AVERAGE FORWARD CURRENT (A) 300 TC = 175oC, dIF/dt = 100A/s 250 t, RECOVERY TIMES (ns) 200 trr 150 100 50 0 1 10 IF , FORWARD CURRENT (A) 30 tb ta 30 25 DC 20 SQ. WAVE 15 10 5 0 25 50 75 100 125 150 175 TC , CASE TEMPERATURE (oC) FIGURE 5. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 6. CURRENT DERATING CURVE 250 CJ , JUNCTION CAPACITANCE (pF) 200 150 100 50 0 0 50 100 150 200 VR , REVERSE VOLTAGE (V) FIGURE 7. JUNCTION CAPACITANCE vs REVERSE VOLTAGE 3 RHRG30100 Test Circuits and Waveforms VGE AMPLITUDE AND RG CONTROL dIF/dt t1 AND t2 CONTROL IF L DUT RG VGE t1 t2 CURRENT SENSE + VDD 0 IF dIF dt ta trr tb IGBT - 0.25 IRM IRM FIGURE 8. trr TEST CIRCUIT IMAX = 1A L = 40mH R < 0.1 EAVL = 1/2LI2 [VR(AVL) /(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) L CURRENT SENSE Q1 VDD DUT R + VDD IV FIGURE 9. trr WAVEFORMS AND DEFINITIONS VAVL IL IL t0 t1 t2 t FIGURE 10. AVALANCHE ENERGY TEST CIRCUIT FIGURE 11. AVALANCHE CURRENT AND VOLTAGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com 4 |
Price & Availability of RHRG30100 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |